Table of Contents
Advertisement
SE7221BK1-E Technical Product Specification
Feature
ECC Event Logging
PCI Error Logging
9.5.7
Exit menu
Feature
Options
Save Changes
N/A
and Exit
Discard
N/A
Changes and
Exit
Discard
N/A
Changes
Load Setup
N/A
Defaults
Load Custom
N/A
Defaults
Save Custom
N/A
Defaults
9.6
Upgrading the BIOS
9.6.1
Preparing for the Upgrade
Before you upgrade the BIOS, prepare for the upgrade by recording the current BIOS settings,
obtaining the upgrade utility, reviewing the release notes, and making a copy of the current
BIOS.
9.6.1.1
Recording the Current BIOS Settings
1. Boot the computer and press <F2> when you see the message:
Press <F2> Key if you want to run SETUP
2. Write down the current settings in the BIOS Setup program or go to the Exit menu and
choose to "Save Custom Defaults".
Note: Do not skip step 2. You will need these settings to configure your computer at the
end of the procedure.
Options
Disabled
Enables or Disables ECC Event Logging.
Enabled
Enables or Disables PCI Error Logging.
Disabled
Enabled
Table 68. BIOS Setup, Exit Menu Selections
Exit system setup after saving the changes.
F10 key can be used for this operation.
Exit system setup without saving any changes.
ESC key can be used for this operation.
Discards changes done so far to any of the setup questions.
F7 key can be used for this operation.
Load Setup Default values for all the setup questions.
F9 key can be used for this operation.
Load custom defaults.
Save custom defaults
Help Text
Help Text
Description
Grayed out if
"Critical
Event
Logging"
option is
disabled.
Grayed out if
"Critical
Event
Logging"
option is
disabled.
57
Advertisement
Table of Contents
