Using The Bios Setup Program; Bios Setup Program Menu Bar - Intel D845GVSR - Desktop Board Motherboard Product Manual

4 Using the BIOS Setup Program

The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
✏
NOTE
The BIOS Setup menus described in this section may not show the latest settings. For the latest
BIOS settings, refer to the Intel Desktop Board D845GVSR Technical Product Specification or the
Intel World Wide Web site at:
http://support.intel.com/support/motherboards/desktop/
✏
NOTE
For reference purposes, you should write down the current Setup settings. When you make
changes to the settings, update this record.
✏
NOTE
The Setup menus described in this section apply to the desktop board with BIOS identifier
VA84510A.86A. Desktop boards with other BIOS identifiers might have differences in some of the
Setup menu screens.
Table 10 shows the BIOS Setup program menu bar.
Table 10.

BIOS Setup Program Menu Bar

Maintenance
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures
extended
configuration
memory settings
* For information about the BIS, refer to the Intel Web site at:
http://developer.intel.com/design/security/index1.htm
Main Advanced
Allocates Configures
resources advanced
for features
hardware available
components through the
chipset
Security Power
Sets Configures
passwords power
and security management
features features
Boot Exit
Selects Saves or
boot discards
options changes to
and power set program
supply options
controls
49