Removing The Battery From The Desktop Board - Intel D845GVSR - Desktop Board Motherboard Product Manual

Installing and Replacing Desktop Board Components
To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" on page 21.
2. Turn off all peripheral devices connected to the computer. Disconnect the computer's power
cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 14).
5. Note the orientation of the "+" and "-" on the battery.
6. With a medium flat-bladed screwdriver, gently pry the battery free from its connector.
7. Install the new battery in the connector, orienting the "+" and "-" correctly.
8. Replace the computer cover.
OM16284
Figure 14. Removing the Battery from the Desktop Board
43