Bios Setup Program Defaults - Intel D815EGEW Quick Reference

The following table describes the jumper settings for configuring USB port 0 and
USB port 1.
Jumper Setting Configuration
1-2 Allows wake from ACPI state S1
1 3
2-3 Allows wake from USB ports in all ACPI states
1 3
(must also set ACPI BIOS option to S3)
1 3
None USB ports will not function

BIOS Setup Program Defaults

For a complete list of the BIOS Setup settings, refer to the Intel customer
support World Wide Web site at:
http://support.intel.com/support/motherboards/desktop
and select Intel Desktop Board D815EGEW Technical Product Specification
under the Product Documentation heading.
NOTES
To disable the audio interface, select the Peripheral Configuration
Submenu under the Advanced Menu, then set Audio Device to "Disabled."
To disable the LAN interface, select the Peripheral Configuration
Submenu under the Advanced Menu, then set LAN Device to "Disabled.
Intel Desktop Board D815EGEW Quick Reference 15