Attaching The Ide Drives; Using The Bios Setup Program; Bios Setup - Intel D845GLLY Quick Reference

6 Attaching the IDE Drives

®
The Intel boxed desktop board package includes an IDE cable. The cable can
connect two drives to the desktop board. The cable supports the ATA-66/100
(40-contact, 80-conductor) transfer protocol and is backward compatible with
drives using slower IDE transfer protocols.
The cable will work correctly only when oriented as shown in the following
figure. For correct cable function:
1. Observe the precautions in "Before You Begin" on page 3.
2. Attach the cable end with the single connector (A) to the desktop board.
3. Attach the cable end with the two closely spaced connectors (B) to the
drives.
3 1
J9H2

Using the BIOS Setup Program

The BIOS Setup program can be used to view and change the BIOS settings for
the computer. The BIOS Setup program is accessed by pressing the <F2> key
after the Power-On Self-Test (POST) memory test begins and before the
operating system boot begins.
10
A
Intel Desktop Boards D845GLLY and D845GLAD
B
OM14567
Quick Reference