ATAPI CD-ROM Drives Submenu
Feature
1st Drive
NOTE
Exit Menu
Feature
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
2-12
Using the BIOS Setup Program
Options
Description
Dependent on
Specifies the boot sequence from the available ATAPI CD-ROM drives.
installed
To specify boot sequence:
ATAPI CD-ROM
1. Select the boot device with < > or < >.
drives
2. Press <Enter> to set the selection as the intended boot device.
Description
Exits and saves the changes in CMOS RAM.
Exits without saving any changes made in Setup.
Loads the default values for all the Setup options.
Discards changes without exiting Setup. The option values (present when the
computer was turned on) are used.