Exit Menu - Intel D845GVSR User Manual

ATAPI CD-ROM Drives Submenu
This submenu is for setting ATAPI CD-ROM drive priority.
Feature Options
1st Drive Dependent on
installed
ATAPI CD-ROM
drives
NOTE
This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported
by the BIOS.

Exit Menu

This menu is for exiting the Setup program, saving changes, and loading and saving defaults.
Feature
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
2-12
Using the BIOS Setup Program
All manuals and user guides at all-guides.com
Description
Specifies the boot sequence from the available ATAPI CD-ROM drives.
To specify boot sequence:
1. Select the boot device with < > or < >.
2. Press <Enter> to set the selection as the intended boot device.
Description
Exits and saves the changes in CMOS RAM.
Exits without saving any changes made in Setup.
Loads the default values for all the Setup options.
Discards changes without exiting Setup. The option values (present when the
computer was turned on) are used.