Stamina 15-0201 Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 4
Attach the SEAT(43) to the SEAT FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x15mm)(58) and
WASHERS(M8)(73). Pull the ADJUSTMENT KNOB(41), then insert the SEAT FRAME(5) into the MAIN
FRAME(1) and secure with the ADJUSTMENT KNOB(41).
NOTE: 1. It may be necessary to unscrew the ADJUSTMENT KNOB(41) slightly to insert the SEAT
FRAME(5).
2. Make sure that the pin on the ADJUSTMENT KNOB(41) is inserted into one of the holes in the
SEAT FRAME(5).
3. The ADJUSTMENT KNOB(41) should be screwed in tight to make the SEAT FRAME(5) fit
securely in the MAIN FRAME(1).
STEP 5
Attach the BACK CUSHION(44) to the BACK SUPPORT(6) with BUTTON HEAD BOLTS(M8x1.25x45mm)
(60) and WASHERS(M8)(73). Attach the BACK SUPPORT(6) to the SEAT FRAME(5) with BUTTON HEAD
BOLT(M8x1.25x80mm)(62), WASHERS(M8)(73), and NYLOCK NUT(69). Lock the BACK SUPPORT(6)
in unfold position with the PULL PIN(48).
STEP 6
Attach the HANDRAIL(7) to the SEAT FRAME(5) with BUTTON HEAD BOLTS(M8x1.25x37mm)(59) and
ARC WASHERS(M8)(71).
8