Environmental Requirements; Memory Specifications - HP StorageWorks 2/32 - SAN Switch Installation Manual

.

Environmental Requirements

Table 10
operating, and the acceptable ranges when the switch is not operating.
Table 10: Environmental Requirements
.
Temperature (operating)
Temperature (non-operating)
Humidity (operating)
Humidity (non-operating)
Altitude (operating)
Altitude (non-operating)
Shock (operating)
Shock (non-operating)

Memory Specifications

The switch utilizes the following memory.
The centralized memory maximizes the overall switch throughput by guaranteeing
full transmit and receive bandwidth to all Fibre Channel ports at all times.
SAN Switch 2/32 Version 4.2.x Installation Guide
lists the environmental ranges that are acceptable when the switch is
Condition
Main Memory (SDRAM): 128 MB per switch
Flash Memory: 32 MB
Boot Flash: 512KB of 8-bit for system boot
Compact Flash: 256 MB
Acceptable Range
10×C to 40×C
-25×C to 70×C
20% to 85% RH non condensing, at
40×C, with maximum gradient with
10% per hour
10% to 850% RH non-condensing, at
70°C
0 to 3 km above sea level
0 to 12 km above sea level
80 G, 2.4 ms, half sine
20 G, 11 ms, half sine wave
Technical Specifications
73