Port Side of the SAN Switch 2/32
Figure 1
1
2
3
Figure 1: Port side of the SAN Switch 2/32
Optical Ports
The Fibre Channel ports are numbered from left to right, with ports 0–15 in the
lower row and ports 16–31 in the upper row. The ports provide the following
functionality:
SAN Switch 2/32 Version 4.2.x Installation Guide
Slide Rack Mount Kit
The following LED indicators:
— Switch Power/Status LED on the port side of the switch
— Port Readiness LED on the non-port side of the switch
— Port Status LED and Port Speed LED for each port
— Power LED on each power supply
— Fan Failure LED on each fan assembly
shows the port side of the SAN Switch 2/32.
1
5
Serial port
Power switch
4
Fibre Channel
Ethernet port
5
port
IP address
label
Automatic negotiation to highest common speed of all devices connected to
the port
Port interfaces compatible with Small Form Factor Pluggable (SFP)
transceivers, both short wavelength (SWL) and long wavelength (LWL)
2
Overview
3
4
SHR-2568A
15