Connecting The San Switch 2/32 To The Lan - HP StorageWorks 2/32 - SAN Switch Installation Manual

Version 4.2.x
Hide thumbs Also See for StorageWorks 2/32 - SAN Switch:
Table of Contents

Advertisement

Connecting the SAN Switch 2/32 to the LAN

Use the following steps to connect the SAN Switch 2/32 to the Ethernet Local
Area Network (LAN) segment.
1. Remove the shipping plug from the SAN Switch 2/32 Ethernet port.
2. Connect one end of an Ethernet cable to the SAN Switch 2/32 Ethernet port as
Figure 15: Connecting the Ethernet cable
3. Connect the other end of the Ethernet cable to the workstation or to an
Note:
Telnet or the Advanced Web Tools application. Verify that the switch is not accessed
from any other connections during the remaining steps.
4. Log in to the switch by Telnet as the admin user. The default admin logon is
SAN Switch 2/32 Version 4.2.x Installation Guide
shown in
Figure
15.
Ethernet network containing the workstation.
You can now access the switch remotely (and from multiple connections), using
admin and the default password is password.
Installing the SAN Switch 2/32
SHR-2573A
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks san switch 2/32

Table of Contents