Screen Status Read Command; Cr_Screen Command; Cr_ Kystnmode Command; Cr_ Cornertestpat Command - Sanyo PLC-XU116 - 4500 Lumens Manual

PLC-XU116 Expand Serial Command Functional Specifications

9.8 Screen Status Read Command

9.8.1

CR_SCREEN Command

Command "CR_SCREEN"[CR]
Details Get selected on-screen image size
Acceptable
%a
Response
Unacceptable
9.8.2

CR_ KYSTNMODE Command

Command "CR_KYSTNMODE"[CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response %a
Unacceptable
9.8.3

CR_ CORNERTESTPAT Command

Command "CR_CORNERTESTPAT" [CR]
Details Get setting status of Testpattern for Corner correction
Acceptable
Response %a
Unacceptable
9.8.4

CR_VSCALE Command

Command "CR_VSCALE"[CR]
Details Get setting status of Vertical Scale Store Mode
Acceptable
Response %1
Unacceptable
"000_%a"[CR]
"NORMAL" --------------- Normal mode is selected
"TRUE" -------------------- True mode is selected
Input "WIDE" --------------------- Wide mode is selected
is "FULL" --------------------- Full mode is selected
PC "CUSTOM" ---------------- Custom mode is selected
When the screen is set to D.Zoom, projector returns the previous
status (NORMAL )
Input "NORMAL" --------------- Normal mode is selected
is "WIDE" -------------------- Wide is selected
Video "CUSTOM" --------------- Custom size is selected
"Error Code"[CR] ------ When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"STR" ---------------------- Store mode is "Store"
"RST" ---------------------- Store mode is "Reset"
"Error Code"[CR]
"000_%1"[CR]
"RED" ---------------------- Red is selected
"WHITE" ------------------- White is selected
"BLUE" --------------------- Blue is selected
"OFF" -----------------------Test patter is Off
"Error Code"[CR]
"000_%1[CR]
"-32" ~ "032"
"Error Code"[CR]
58/72
condition such as Input source