Cr_V - Pos Command; Cr_Ddots Command; Cr_Dline Command; Cr_Pcstore Command - Sanyo PLC-XU116 - 4500 Lumens Manual

PLC-XU116 Expand Serial Command Functional Specifications
9.5.5 CR_V – POS Command
Command
"CR_V
Details Get Vertical Position value
Acceptable
%a
Response
Unacceptable
9.5.6

CR_DDOTS Command

Command "CR_DDOTS"[CR]
Details Get Display Dots value
Acceptable
%a
Response
Unacceptable
9.5.7

CR_DLINE Command

Command "CR_DLINE"[CR]
Details Get Display Line value
Acceptable
%a
Response
Unacceptable
9.5.8

CR_PCSTORE Command

Command "CR_PCSTORE"[CR]
Get Free/Stored status of MODE1 - MODE5 for PC Adjust
Each data consists of 5 bytes.
Details
Each byte indicates the status of MODE1~MODE5 respectively.
(F:Free S:Stored)
Acceptable
Response %a
Unacceptable
-
POS"[CR]
"000_%a"[CR]
"0000"~"nnnn"
(nnnn = Total Line - Display Line)
"Error Code"[CR] -------- When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"0256"~"nnnn"
(nnnn = Total Dots – Horizontal Position value)
"Error Code"[CR] -------- When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"0100"~"nnnn"
(nnnn = Total Line – Vertical Position value)
"Error Code"[CR] -------- When the command is invalid due to
"?"[CR] ----------------------- When unclear command is received
"000_%a"[CR]
"FFFFF" ----------- All Free
"SFFFF" ----------- MODE1 is Stored, others are Free
:
"FFFFS" ----------- MODE5 is Stored, others are Free
"SSSSS" ---------- All Stored
"Error Code"[CR]
52/72
condition such as Input source
condition such as Input source
condition such as Input source