PLC-XU116 Expand Serial Command Functional Specifications
8.6.8
CF_INPUT_%1_%2 Command
Command
"CF_INPUT_%1_%2"[CR]
"COMPUTER1" ------ Select Computer1 Input
"COMPUTER2" ------ Select Computer2 Input
%1
"VIDEO" ---------------- Select Analog Input
"S-VIDEO" ------------- Select S-video Input
When %1 is COMPUTER1
"ANALOG" ----------Select Analog RGB Input
"YPBPR" ------------- Select Component
"SCART" ------------- Select SCART
When %1 is COMPUTER2
"DIGITAL" -----------Select DVI Input
%2
"HDCP" --------------Select DVI HDCP Input
"ANALOG" ---------- Select Analog RGB Input
When %1 is VIDEO
"VIDEO" --------- Select Video Input
When %1 is S-VIDEO
"S-VIDEO" ------ Select S-Video Input
Select Input specified by %1 and also Source specified by %2 at once
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
27/72