Removing the Access Plate
If you are installing an option board for the first time:
a. Turn the printer around so the rear is facing you.
b. Use a screwdriver to pry the plate from the back panel of
the printer.
|
OKI Flash SIMM
6
access
plate
Installing the SIMM Card
Install the Flash SIMM card in the SIMM 2 socket on the
option board.
1 Place the option board on a flat surface. Locate the SIMM
2 socket.
SIMM 1
SIMM 2
bottom
2 Remove the SIMM card from its packaging.
3 Hold the SIMM card with the metallic contact edge down,
and the notch on the bottom.
4 Insert the metallic contact edge of the SIMM card into the
SIMM 2 socket at a 45° angle.