Removing jammed staples
When stapling is not taking place as expected and there are still
staples in the staple cartridge unit, check for a staple jam.
1. Detach the Finisher.
WARNING:
Do not touch the Finisher Guide (2) as it may be hot.
a. Rotate the Decurler Lever (1) to
point downwards.
b. Rotate the Release Lever (3)
upwards and detach the Finisher
from the printer.
c. Open the Staple Cover (1) to expose the Staple Unit (2).
2. Remove the staple cartridge unit from the staple unit.
2
WARNING:
Be careful to avoid components and edges inside the Finisher.
1
Do not touch the Staple Unit motor (3) which may be hot.
a. Lift the blue Lock Lever (1) and
3
35
1
rotate the Staple Unit (2) in the direc-
tion of the arrow.
2
3
2
1