Quality Of Service (Qos) Screen - ZyXEL Communications WAP3205 User Manual

Table 37 Network > Wireless LAN > Advanced
LABEL
HT (High Throughput) Physical Mode - Use the fields below to configure the 802.11 wireless environment of
your WAP3205 v2.
Operating Mode
Channel
Bandwidth
Guard Interval
Extension
Channel
Apply
Cancel

10.8 Quality of Service (QoS) Screen

The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN > QoS. The following screen appears.
Figure 63 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
Table 38 Network > Wireless LAN > QoS
LABEL
Enable WMM QoS
Apply
Cancel
WAP3205 v2 User's Guide
DESCRIPTION
Choose this according to the wireless mode(s) used in your network.
Mixed - Select this if the wireless clients in your network use different wireless modes (for
example, IEEE 802.11b/g and IEEE 802.1n modes)
Green - Select this if the wireless clients in your network uses only one type of wireless
mode (for example, IEEEE 802.11 n only)
Select the channel bandwidth you want to use for your wireless network.
It is recommended that you select 20/40 MHz.
Select 20 MHz if you want to lessen radio interference with other wireless devices in your
neighborhood.
Select Auto to increase data throughput. However, this may make data transfer more
prone to errors.
Select Long to prioritize data integrity. This may be because your wireless network is busy
and congested or the WAP3205 v2 is located in an environment prone to radio interference.
This is set to Auto by default.
If you select 20/40 MHz as your Channel Bandwidth, the extension channel enables the
WAP3205 v2 to get higher data throughput. This also lowers radio interference and traffic.
Click Apply to save your changes back to the WAP3205 v2.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Check this to have the WAP3205 v2 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
Click Apply to save your changes to the WAP3205 v2.
Click Cancel to reload the previous configuration for this screen.
Chapter 10 Wireless LAN
95