Deploying The Wap3205 V2 In Your Network - ZyXEL Communications WAP3205 User Manual

Chapter 8 Tutorials

8.7.3 Deploying the WAP3205 v2 in your Network

After you finish configuring the operating mode and wireless settings on the WAP3205 v2,
1
disconnect the computer from the WAP3205 v2 and change its TCP/IP settings back to the previous
ones.
Connect a device to the WAP3205 v2, which you want to use to access the AP or wireless router
2
through the WAP3205 v2. Make sure the device is set to obtain an IP address automatically.
76
WAP3205 v2 User's Guide