ZyXEL Communications WAP3205 User Manual page 42

Chapter 5 Universal Repeater Mode
The following table describes the labels in this screen.
Table 19 Universal Repeater Mode: Wireless LAN > Site Survey
LABEL
Station Site Survey
#
SSID
BSSID
Signal Strength
Channel
Encryption
Authentication
Network Type
Rescan
Setting
42
DESCRIPTION
Select a wireless device and click Setting to go to the Universal Repeater screen with
the selected wireless device's wireless setttings configured. You then just need to enter the
security key (if required) and click Apply in the Universal Repeater screen to connect to
the selected wireless device.
This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the WAP3205 v2 is
connecting to it.
This displays the MAC address of the wireless device.
This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your WAP3205 v2 and this device.
This displays the channel number used by this wireless device.
This displays the data encryption method used by this wireless device.
This displays the authentication method used by this wireless device.
This displays the network type (In (Infrastructure) or Ad Hoc) of this wireless device.
Click this button to search for available wireless devices within transmission range and
update this table.
Select a wireless device and click this button to have the WAP3205 v2 automatically
configure the selected wireless device's wireless settings in the Universal Repeater
screen.
WAP3205 v2 User's Guide