ZyXEL Communications WAP3205 User Manual page 22

Wireless n300 access point
Hide thumbs Also See for WAP3205:
Table of Contents

Advertisement

Chapter 3 Access Point Mode
Table 5 Navigation Panel: Access Point Mode
LINK
Wireless LAN
LAN
MAINTENANCE
General
Password
Time
Firmware
Upgrade
Backup/
Restore
Reset/
Restart
22
TAB
FUNCTION
General
Use this screen to configure general wireless LAN settings.
Security
Use this screen to configure wireless security settings.
MAC Filter
Use the MAC filter screen to configure the WAP3205 v2 to block access to
devices or block the devices from accessing the WAP3205 v2.
Advanced
This screen allows you to configure advanced wireless settings.
QoS
Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM
QoS). WMM QoS allows you to prioritize wireless traffic according to the
delivery requirements of individual services.
WPS
Use this screen to configure WPS.
WPS Station
Use this screen to add a wireless station using WPS.
Scheduling
Use this screen to schedule the times the Wireless LAN is enabled.
WDS
Use this screen to set up Wireless Distribution System (WDS) on your
WAP3205 v2.
IP
Use this screen to configure LAN IP address and subnet mask.
IP Alias
Use this screen to have the WAP3205 v2 apply IP alias to create LAN
subnets.
Use this screen to view and change administrative settings such as system
and domain names.
Password
Use this screen to change the password of your WAP3205 v2.
Setup
Time Setting
Use this screen to change your WAP3205 v2's time and date.
Use this screen to upload firmware to your WAP3205 v2.
Use this screen to backup and restore the configuration or reset your
WAP3205 v2 to the factory defaults.
Restart
This screen allows you to reboot the WAP3205 v2 without turning the
power off.
WAP3205 v2 User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wap3205 v2

Table of Contents