Setting
Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 37),
then select the item from the sub-menu.
Remote Control
Language
1 )
Press ▲▼ to select [Language].
2 )
Press ► or the <SELECT> button.
3 )
Press ▲▼ to select the desired
language.
The language used in the On-Screen Menu is
z
available in English, German, French, Italian,
Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian,
Russian, Turkish, Arabic, Kazak, Simplified
Chinese, Traditional Chinese, Korean, Japanese
and Tha
i.
Control Panel
Menu position
This function is used to change the position of the On-
Screen Menu.
1 )
Press ▲▼ to select [Menu position].
2 )
Press the <SELECT> button to change
the position.
The Menu position changes each time you
z
press <SELECT> button as follows:
the center → the bottom left → the bottom right → the
top left → the top right → the center......
Auto setup
1 )
Press ▲▼ to select [Auto setup].
2 )
Press ► or the <SELECT> button.
3 )
Press ▲▼ to select these functions as
follows:
Input search
J
This function detects the input signal automatically.
When a signal is found, the search will stop.
Off
Input search will not work
On 1
Input search works*
On 2
Input search works*
*1 :
●When pressing the <AUTO SETUP> button on the
remote control or the control panel.
*2 :
●When turning on the projector by pressing the
<
>
button on the remote control or the control
panel.
●
When pressing the<AUTO SETUP> button on
the remote control or the control panel.
●
When the current input signal is cut off.*
* If the [AV mute] or [Freeze] function is active,
cancel it to activate the Input search. It is also
unavailable when On-Screen menu is displayed.
Auto PC adj.
J
On
Enables Auto PC adjustment *
Off
Disables Auto PC adjustment
*1 :
When pressing the <AUTO SETUP> button on
the remote control or the control panel.
Note
[Input search] and [Auto PC adj.] cannot be set [Off] at
z
the same time.
1
2
1
53
ENGLISH -