Status Read Command - Panasonic PT-CW230U Operating Instructions Manual

Technical Information

Status Read Command

J
Format
The projector control command is defined as one command line that starts with "CR" and ends with carriage
return.
PC � Projector
Projector � PC
Command
CR0
CR6 Temperature Read
70
- ENGLISH
"C" "R" "0" CR
Function Projector
Return
00
80
40
20
10
Status Read
28
24
04
21
81
%1 %2
%3
?
Command
Processing
(A few ms ~ 5s)
Power On
Stand-by mode
Countdown
Cooling down
Power Malfunction
Cooling down at the temperature anomaly
Cooling down at Power Management mode
Power Management mode after Cooling down
Cooling down after the projector is turned off when the lamps are out.
Stand-by mode after Cooling down when the lamp is out.
%1 = Temperature at Sensor 1 (˚C)
%2 = Temperature at Sensor 2 (˚C)
%3 = Temperature at Sensor 3 (˚C)
(ex.) %1 = 12.3˚C, %2 = 23.4˚C, %3 = 34.5˚C
--> The projector displays "12.3 23.4 34.5"
( For each sensor, two digit and the tenth place numbers are displayed
with a space between each temperature.)
Communication failure
CR
ACK
Projector status