HP D5970A - NetServer - LCII Installation And Configuration Manual page 66

Menu Choice
1. Volume Segments On Drive
2. Read After Write Verify
3. Drive Light Status
4. Driver Operating Status
5. Removable Drive Mount Status
6. Removable Drive Lock Status
1
Valid for both removable and non-removable types of SCSI disk drives.
2
Valid for removable media only.
Mount Status
Mounting causes a drive to come on-line as a NetWare storage device.
Dismounted drives are inactive and cannot be accessed.
Before you eject your current media, you should first Dismount it (menu choice
5). When the media status is Dismounted, you can eject the media. However,
NetWare does not allow you to dismount it if the media is locked.
To insert your new media, wait for the drive to spin-up, and then select the
Drive Mount option.
Lock Status
If your removable-media device supports the Lock/Unlock feature, you can
lock the media (menu choice 6). The media must be in the Not Locked state
before you can eject it. If the media is Locked, it cannot be ejected when you
press the Eject button.
60
Default Value
1
(select for list)
1
Hardware Level
1
Not Supported
1
Active
2
Mounted
2
Not Locked