Lexmark W850 User Manual page 56

Loading paper and specialty media
8
Press the left or right arrow button until Custom Type <x> or another custom name appears, and then press
.
Submitting selection appears, followed by Paper Menu.
9
Verify that the correct Paper Type is associated with the custom name.
Note: Plain Paper is the factory default Paper Type associated with all Custom Type <x> names and user‑defined
custom names.
a
From the Paper menu, press the up or down arrow button until Custom Types appears, and then press
.
b
Press the up or down arrow button until
.
c
Press the up or down arrow button until
.
Submitting selection appears.
Changing a Custom Type <x> name
You can use the Embedded Web Server or MarkVision
custom paper types that are loaded. When a Custom Type <x> name is changed, the menus display the new name
instead of Custom Type <x>.
To change a Custom Type <x> name from the Embedded Web Server:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Settings.
3
Under Default Settings, click Paper Menu.
4
Click Custom Names.
5
Type a name for the paper type in a Custom Name <x> box.
Note: This custom name will replace a custom type <x> name under the Custom Types and Paper Size/Type
menus.
6
Click Submit.
7
Click Custom Types.
Custom Types appears, followed by your custom name.
8
Select a Paper Type setting from the list next to your custom name.
9
Click Submit.
appears next to the custom paper type name, and then press
appears next to the Paper Type setting you want, and then press
TM
to define a name other than Custom Type <x> for each of the
56