Lexmark W850 User Manual page 102

Understanding printer menus
Menu item
Run Initial setup
Yes
No
Paper Sizes
US
Metric
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Hole Punch Alarm
Timeouts
Job Hold Timeout
5–255 sec
Description
Instructs the printer to run the setup wizard
Notes:
•
Yes is the factory default setting.
•
After completing the setup wizard by selecting Done at the
Country select screen, the default becomes No.
Specifies the printer factory default measurements. The default is
determined by the country/region selection in the initial setup
wizard.
Note: Changing this setting also changes the Units of
Measurement setting in the Universal Setup menu and the
default for each input source in the Paper Size/Paper Type menu.
Sets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
Single
Off
Continuous
Notes:
•
Single is the factory default setting for Alarm Control. Single
sounds three quick beeps.
•
Off is the factory default setting for Cartridge Alarm and
Staple Alarm. Off means no alarm will sound.
•
Continuous repeats three beeps every 10 seconds.
•
The Staple Alarm is available only when the finisher is
installed.
•
The Hole Punch Alarm is displayed only when a finisher with
hole punch is installed.
Sets the amount of time the printer waits for user intervention
before it holds jobs that require unavailable resources and
continues to print other jobs in the print queue
Notes:
• 30 seconds is the factory default setting.
• This menu item appears only when a printer hard disk is
installed.
102