Lexmark W850 User Manual page 108

Understanding printer menus
Menu item
Separator Source
Tray <x>
Manual Feeder
N‑up (pages‑side)
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
N‑up Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Orientation
Auto
Landscape
Portrait
N‑up Border
None
Solid
Staple Job
Off
Auto
Front
Back
Dual
Hole Punch
Off
On
Description
Specifies the paper source for separator sheets
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for
Multi‑Purpose Feeder to appear as a menu setting.
Specifies that multiple‑page images be printed on one side of a sheet of paper
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Specifies the positioning of multiple‑page images when using N‑up (pages‑sides)
Notes:
•
Horizontal is the factory default setting.
• Positioning depends on the number of images and whether the images are in
portrait or landscape orientation.
Specifies the orientation of a multiple‑page sheet
Note: Auto is the factory default setting. The printer chooses between portrait and
landscape.
Prints a border around each page image when using N‑up (pages‑sides)
Note: None is the factory default setting.
Specifies whether print jobs are stapled
Notes:
•
Off is the factory default setting. Print jobs are not stapled.
•
Envelopes are not stapled.
Specifies whether a hole punch is applied to print jobs
Notes:
•
This menu item is available only when a finisher with Hole Punch is installed.
•
Off is the factory default setting. A hole punch is not applied to print jobs.
108