4.4 Wireless LAN Card
4.4
Wireless LAN Card
Removing the Wireless LAN Card
To remove the wireless LAN card (option) make sure the computer is in boot mode and powered
off, follow the steps below and refer to figures 4-9 to 4-11.
CAUTION: Do not try to remove the wireless LAN card with the computer turned on. You
can damage the computer and wireless LAN card.
1. Turn the computer upside down.
2. Remove following screws using a LH-STIX screwdriver or ordinary driver.
M2 4 LH-STIX
M2 4 silver
3. Remove the wireless LAN card slot cover.
PORTEGE M100 Maintenance Manual (960-452)
4 Replacement Procedures
2 (for Atheros card, but not for Toshiba
direct PC)
2 (for cards other than Atheros card)
4-21