4.1 General
Installing the Optional PC Card
To install the PC card (option), follow the steps below and refer to figure 4-2.
1. Make sure that the eject button is out.
2. Insert the PC card. Press gently to ensure a firm connection.
Removing the Optional SD Card
To remove the SD Card (option), make sure the computer is in boot mode, then follow the steps
below and refer to figure 4-3.
CAUTION: Before you remove an SD Card, refer to the card's documentation and to your
operating system documentation for proper procedures and precautions.
1. Push in the SD card and release it to pop the card out slightly.
2. Grasp the SD card and remove it.
Installing the Optional SD Card
To install the SD Card (option), follow the steps below and refer to figure 4-3.
1. Insert the SD card.
PORTEGE M100 Maintenance Manual (960-452)
Figure 4-3 Removing a SD Card
4 Replacement Procedures
4-11