4.3 Slim Select Bay Options
4.3
Slim Select Bay Options
Removing the Slim Select Bay Options
NOTE: This section explains how to change modules in the Slim Select Bay. The illustration
shows replacement of the DVD-ROM drive as an example. The procedures are the
same for any of the modules: DVD-ROM drive, CD-RW/DVD-ROM drive, optional
Slim Select Bay HDD adaptor or optional secondary battery pack with separate
tray.
To remove the Slim Select Bay module, follow the steps below and refer to figure 4-8.
1. Turn the computer upside down.
2. Slide the Slim Select Bay latch to the unlock position.
3. Grasp the DVD-ROM drive and slide it out.
PORTEGE M100 Maintenance Manual (960-452)
Figure 4-8 Removing a Slim Select bay module
4 Replacement Procedures
4-19