HP Workstation x1000 User Manual page 33

2. Monitor Tuning: With the buttons in the Move and Size sections
you can tune the position and size of the monitor's display for the
indicated resolution and refresh rate.
Notes: (1) Use the hardware setting controls on your monitor, if
available, to adjust your display size or position - instead of the
software controls in 'Adjustment - Monitor Tuning.' Check the
documentation of your monitor for information on your monitor's
hardware controls.
(2) Resizing the display slightly changes the actual refresh rate. If
you operate a fixed-frequency monitor check the documentation of
your monitor for information on refresh rate tolerances.
Sync Polarity: If you do not get a satisfactory display with the
default sync polarity setting for the current resolution, you may
try and change the settings.
Undo: Click this button to undo the last change you made
(when you clicked Apply). If you have made a modification that
causes your screen to go blank or to be unreadable, the keyboard
shortcut for 'Undo' is Alt-U.
Default: Click this button to set the Monitor Tuning to the
manufacturer's default settings.
Notes:
(1) Press the ESC key on your keyboard to undo the changes if
your monitor has lost synchronization. You may also use the
keyboard shortcut for 'Undo' - Alt-U.
(2) If you change the resolution (in Settings) and/or the refresh rate
(in Monitor), you may need to re-adjust the monitor's display.
30 Fire GL2 Software Utilities