HP Workstation x1000 User Manual page 19

Ati fire gl 2 graphics card users guide

Hide thumbs Also See for Workstation x1000:

Table of Contents

Setting the Monitor Impedance

If you can switch the impedance values on your monitor, use the

following recommended settings:

R, G, B video input: 75 Ohm

Synch: 2.2 kOhm

Try other 'Synch' settings if you cannot achieve a stable video image.

If the impedance setting options are 'High' and 'Low' only, try the

setting that provides the most satisfactory monitor display.

Connecting the Stereo Glasses

You need this information only if you want to use StereoGraphics'

CrystalEyes or compatible stereoviewing eyewear.

Please note that stereo glasses are optional equipment and not included

in the Fire GL2 package.

Connect your stereoviewing eyewear to the 3 pin Mini-DIN stereo sync

connector (3) on the card.

Note: If the connector on your stereoviewing eyewear does not fit into

the Mini-DIN connector on the card, please contact your supplier or the

manufacturer of the stereo glasses for information on how to obtain an

adapter cable.

Installing the Fire GL2

Table of Contents