HP Workstation x1000 User Manual page 37

Adding a new application profile:
Click the Add button in the Configuration Profiles section and
enter the new application for which you want to set the
configuration parameters.
Modifying the configuration parameters: To change the
configuration settings of a specific application, for example, CATIA,
select the application from the list in the Configuration Profiles
section and click the Modify button. To remove the selected
configuration profile completely, click Delete.
If you add or modify a configuration profile, select or clear the
checkboxes the Settings section according to your requirements.
Overlay Planes
8-Bit double-buffered
Use 8 bits of each 32-bit frame buffer pixel as double-buffered
overlay planes.
8-Bit single-buffered
Use 8 bits of each 32-bit frame buffer pixel as single-buffered
overlay planes.
Force copy swap
Force blit copy from back to front buffer.
Wait for vertical retrace
Buffer swap 'synched' to vertical retrace. Enable this function
for best picture quality. If you disable 'Wait for vertical retrace'
you may experience visual artifacts such as tearing. However,
this function may be disabled for performance benchmarking.
Click the Apply or OK button to enable your Configuration
settings.
34 Fire GL2 Software Utilities