HP Workstation x1000 User Manual page 13

Where are the drivers?
Are you installing your
Fire GL2 in place of a
card from another
manufacturer?
Do you have an
integrated graphics
solution on the
motherboard?
Plug-n-Play?
The illustrations do not
show your card?
10 Installing the Fire GL2
Windows NT 4.0 and Windows 2000
drivers are provided on the Fire GL CD.
Linux drivers are available for
downloading from www.ati.com/support.
Before you shut down your computer and
remove the installed graphics solution , we
recommend that you un-install the old card
first:
Use the uninstall program for your
existing card, if one is available. Consult
the documentation for your old card if
necessary.
If no uninstall program is available, install
the standard VGA driver via the Display
Properties applet. For more
information refer to Setting the Display
Driver to Standard VGA.
Please refer to the manual or contact your
motherboard manufacturer to determine
how to disable your on-board graphics.
The card has been designed to take
advantage of 'plug–n-play' without requiring
additional hardware installation or
configuration.
The illustrations provided in this section are
for instructional use only; the card shown
may look different than the one you
purchased.