Changing Bios Settings Using The F10 Utility - HP T5730 - Compaq Thin Client Troubleshooting Manual

Halt On
Security Option
USB Keyboard Support
USB Mouse Support
NOTE: Settings that can be controlled from the operating system with repset can also be controlled
remotely by sending the client an Altiris job that uses the repset tool to apply the setting changes.

Changing BIOS Settings Using the F10 Utility

1. Turn on or restart the thin client.
2. As soon as the thin client is turned on, press
screen to enter the Setup utility.
NOTE:
press F10
When the F10 POST Screen display is set to zero seconds, it may be necessary to press and
hold F10
3. The Setup Utility screen is divided into five menu headings and five task actions.
The Menu Headings are: System Information, Standard CMOS Features, Advanced BIOS
Features, Integrated Peripherals, Power Management Setup
The Task Actions are: Load Factory Defaults, Set Administrative Password, Set User Password,
Save & Exit Setup, Exit without Saving
Use the arrow keys (up and down or left and right) to select the appropriate heading, then press
Enter. To return to the Setup Utility menu, press
4. To apply and save changes, select Exit Setup & Save.
If you have made changes that you do not want applied, select Exit without Saving.
To reset to original factory settings, select Load Factory Defaults.
CAUTION:
because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10
Setup screen.
Table 4-1 Setup (F10) Utility Main Menu
Heading
System Information
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
All, but Keyboard
Setup
Enabled
Disabled
If you do not press F10
when the F10=Setup message displays in the task bar at the bottom of the screen.
on the keyboard, then power on the thin client.
Do NOT turn the thin client power Off while the ROM is saving the Setup (F10) changes
F10 when the "press F10" prompt appears on the
at the appropriate time, you must restart the thin client and again
Esc key.
Table
Setup Utility—System Information on page 20
Setup Utility—Standard CMOS Features on page 20
Setup Utility—Advanced BIOS Features on page 20
Setup Utility—Integrated Peripherals on page 21
Setup Utility—Power Management Setup on page 22
No Errors
Always
Disabled
Enabled
Using the BIOS Settings 19