Troubleshooting - Denon S32 - Micro System Owner's Manual

Wireless network music system
Hide thumbs Also See for S32 - Micro System:
Table of Contents

Advertisement

ENGLISH

Troubleshooting

If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner's manual?
3. Are the other components operating properly?
If this unit does not operate properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction.
In this case, disconnect the power immediately and contact your store of purchase.
GGeneralH
Symptom
Cause
Display not lit
• Power cord not plugged in
and sound not
securely.
produced when
power switch set
to on.
Display lit but
• Device you want to play and set
sound not
input source do not match.
produced.
• Volume control set to minimum.
• MUTING is on.
Display is dim.
• Dimmer function is on.
GRemote Control UnitH
Symptom
Cause
Set does not work
• Batteries are worn.
properly when
• You are operating outside of the
remote control
specified range.
unit operated.
• Obstacle between main unit and
remote control unit.
• The batteries are not inserted in
the proper direction, as indicated
by the polarity marks in the
battery compartment.
• The set's remote control sensor
is exposed to strong light (direct
sunlight, inverter type fluorescent
bulb light, etc.).

Countermeasure
Page
• Plug the power cord into the wall
7
power outlet.
• Select
an
appropriate
input
12
source.
• Turn volume up to suitable level.
12
• Switch off MUTING.
12
• Turn the dimmer function off by
13
pressing the DIMMER button.
Countermeasure
Page
• Replace with new batteries.
2
• Operate within the specified
2
range.
• Remove the obstacle.
2
• Insert
the
batteries
in
the
2
proper direction, following the
polarity marks in the battery
compartment.
• Move the set to a place in which
2
the remote control sensor will
not be exposed to strong light.
GiPodH
Symptom
Cause
iPod cannot be
• Input source is not right.
played.
• iPod is not properly mounted in
dock for ipod.
GNETH
Symptom
Cause
The file names
• Characters
that
cannot
are not displayed
displayed are used.
properly (" ... " , etc.).
Files stored on a
• Files are stored in a non-
computer cannot
compatible format.
be played.
• You are attempting to play a file
that is copyright protected.
Internet radio
• Ethernet cable is not properly
cannot be played.
connected
or
network
disconnected.
• Program is being broadcast in
non-compatible format.
• The
computer's
or
firewall is activated.
• Radio station is not currently
broadcasting.
• IP address is wrong.
Server is not
• The
computer's
or
found, or it is
firewall is activated.
not possible to
• Computer's power is not turned
connect to the
on.
server.
• Server is not running.
• Set's IP address is wrong.
Cannot connect to
• Radio station is not currently
preset or favorite
broadcasting.
radio stations.
• Radio station is not currently in
service.
Countermeasure
• Select
an
appropriate
input
source.
• Remount the iPod.
Countermeasure
be
• This is not a malfunction. On
this set, characters that cannot
be displayed are replaced with a
" . (period)" .
• Record in a compatible format.
• Files that are copyright protected
cannot be played on this set.
• Check the connection status.
is
• Only Internet radio programs in
MP3 and WMA can be played on
this set.
router's
• Check the computer's or router's
firewall settings.
• Choose a radio station that is
currently broadcasting.
• Check the set's IP address.
router's
• Check the computer's or router's
firewall settings.
• Turn on the power.
• Launch the server.
• Check the set's IP address.
• Wait a while before trying again.
• It is not possible to connect to
radio stations that are no longer
in service.
Page
17
5
Page
13
13
6
14
9, 10
9, 10

Advertisement

Table of Contents
loading

Table of Contents