Connection To A Subwoofer; Network Audio; Antenna Terminals ······································································5 - Denon S32 - Micro System Owner's Manual

ENGLISH
AM loop antenna assembly
Remove the vinyl tie and take out the connection
line.
Connect to the AM antenna terminals.
Bend in the reverse direction.
a. With the antenna on top any stable
surface.
Mount
b. With the antenna attached to a wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the 2. Insert the
lever. conductor.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
• Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.


Connection to a Subwoofer

Use connected to a subwoofer.
3. Return the
lever.
NOTE
When turning the power ON/OFF:
ON: First turn on the power to the main unit, then turn on the power
to the subwoofer.
OFF: First turn off the power to the subwoofer, then turn off the power
to the main unit.

Network Audio

[Wired LAN]
Subwoofer
Internet radio
Router
[Wireless LAN]
Internet radio
To WAN side
Router with access point
Computer
Modem
To WAN side
To LAN port
To LAN port LAN port/
Ethernet port
Computer
Modem
Wireless LAN rod
antenna (Supplied)
Turn clock
wise