Denon S32 - Micro System Owner's Manual page 14

ENGLISH
Wireless LAN Settings
Make settings for wireless LAN.
The mode automatically switches to "Wireless" .
Display menu "SETUP" – "Network Setting" – "Network Setting" .
To search for the network automatically
Search
If searching is possible, the
access points are displayed.
Select the access point to
be set.
Without security
Connection (continued on right page)
0
Turn on the S-32's power.
If no Ethernet cable is connected
Access point settings
To set manually
"Detail" setting
q Input the SSID.
w If there is security, select
the encryption method.
e Input the encryption key.
If searching is not possible
r If "WEP" was selected in
step w, select the default
key.
Normally select "1" .
Make the SSID setting at
"Manual" .
With security
Input the encryption key.
For WEP , also input the
default key.
To acquire the IP Address
automatically using the DHCP function
z
To not pass through the proxy server
z: This is the flow for infrastructure type communications. For ad-hoc communications, set "Mode" at
the "Detail" settings to "Ad-hoc" .
NOTE
Knowledge about networks is required to make the IP Address and Proxy settings. For details,
consult a network administrator.
Connection
To enter the IP Address manually
At the menu "SETUP" – "Network Setting"
– "Network Setting" – "Detail" setting, set
"DHCP" to "Off" and enter the IP Address,
Subnet Mask, Gateway, Primary DNS and
Secondary DNS.
To connect via proxy server
This setting is required
when the network is
established
servers.
At the menu "SETUP" –"Network Setting" –
"Network Setting" – "Detail" – "Proxy" setting,
set "Proxy" to "On" and enter the address or
domain name and port numbers.
This completes the setting.
via proxy