Network Setting - Denon S32 - Micro System Owner's Manual

s Network Setting
Make settings for wired or wireless LAN.
Wired LAN
Make settings for wired LAN.
To acquire the IP address automatically
using the DHCP function
To not pass through the proxy server
Recheck the connections and settings if you cannot connect to the Internet (vpage 6).
NOTE Knowledge about networks is required to make the IP Address and Proxy settings. For details, consult a network administrator.
Turn on the S-32's power.
If a Ethernet cable is connected
The mode automatically switches to "Wired" .
To enter the IP address manually
At the menu "SETUP" – "Network Setting"
– "Network Setting" – "Detail" setting, set
"DHCP" to "Off" and enter the IP Address,
Subnet Mask, Gateway, Primary DNS and
Secondary DNS.
To connect via proxy server
At the menu "SETUP" –"Network Setting" –
"Network Setting" – "Detail" – "Proxy" setting,
set "Proxy" to "On" and enter the address or
domain name and port numbers.
This completes the setting.
This setting is required when the network
is established via proxy servers.
ENGLISH