Password
User Password
This option allows you to set or reset the user password for power on.
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
S
2. Enter a password of up to 10 characters. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
S
If you click the OK button before entering the password,
Not registered will appear on the display.
3. Click the OK button. The following message appears, allowing you to
verify the password.
S
4. If character strings match, the password is registered click OK button.
If they do not match, the following message appears. You must repeat
from step 1.
S
Tecra S1 Series
Change or remove the password. (Default)
Set the password. A dialog box will appear to let
you set the password.
Enter Password:
Enter Password: ****
Verify Password:
Entry Error!!!
HW Setup and Passwords
7-3