Supervisor Password; Device Config - Toshiba PT831U-102T97 User Manual

To delete a user password:
1. Select Not Registered to display the following prompt:
S
2. Enter the currently registered password. The character string you
enter is displayed as a string of asterisks.
S
If you click the OK button before entering the password, Registered
will appear on the display.
3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
S
If they do not match, the following message appears. You must repeat
step 1.
S
If you enter the password incorrectly three times, the screen will display:
Sorry, access denied!!!
You will not be able to access the password option in the HW Setup. In
this case you must turn the power off and back on to retry the procedure.
4. Follow the same procedures described in the earlier section, How to
set the password, to set a new user password.
Refer to the Supervisor password section later in this chapter for details
on setting the supervisor password.

Device Config

Device Configuration
This option lets you set the device configuration.
All Devices
Setup by OS
Tecra S1 Series
Enter Password:
Enter Password: ****
Not registered
Incorrect Password!!!
BIOS sets all devices.
Operating system sets devices that it can
control. (Default)
HW Setup and Passwords
7-4