Arrow mode
To turn on the Arrow mode, press Fn + F10. Now try cursor and page
control using the keys shown in the following illustration. Press Fn + F10
again to turn off the overlay.
Numeric mode
To turn on the Numeric mode, press Fn + F11. Now try numeric data
entry using the keys in shown in the following illustration. Press Fn + F11
again to turn off the overlay.
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard
without turning off the overlay:
1. Hold Fn and press any other key. All keys will operate as if the overlay
were off.
2. Type upper-case characters by holding Fn + Shift and pressing a
character key.
3. Release Fn to continue using the overlay.
Tecra S1 Series
The numeric keypad overlay
The Keyboard
5-7