Supervisor Password - Toshiba Portege 2010 User Manual

User's Manual
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the
computer.
2. The selection method above does not change the boot
priority settings in HW Setup.
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot according
to the current setting in HW Setup.
4. Support of PCA (ATA) card boot is guaranteed only for
TOSHIBA PC card HDDs.
5. A PCA (ATA) card takes the position of HDD in the Boot
Priority Options list.
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE]
[RPL]
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard and
only when the computer is in standby mode.
Enabled
Disabled
7-8
Sets PXE as the protocol. (Default)
Sets RPL as the protocol.
Enables Wake-up on Keyboard.
Disables Wake-up on Keyboard. (Default)