HP Brio 80xx Upgrade Manual page 29

Troubleshooting
If the new memory is not recognized, check that you have correctly followed the installation procedure described
above.
If there are any errors reported during the computer's startup routine, press
necessary action.
If you cannot start your computer properly, remove the memory and try starting your computer again. If the computer
now starts OK, there may be a problem with the new memory.
If you experience any other problems as a result of the upgrade, refer to the online support center.
Removing a
If you need to remove a main memory module, release the retaining clips at both ends of the socket and lift the module
Memory Module up and then out.
a. Release the
retaining clips
b. Lift the module up,
then out
2 Installing Accessories in Your Computer
Installing Main Memory
to view the error(s) and take any
29