HP Brio 80xx Upgrade Manual page 28

3 Slide the memory module into the socket at an angle of about 45° (that is, the leading edge of the module is pointing
slightly to the back of the computer). Firmly press the module completely into the socket.
4 Pivot the memory module until it clicks into the socket retaining clips.
5 Repeat this procedure to install each of the new memory modules.
6 Install any other accessories before replacing the cover, and reconnecting the power supply cords and any
telecommunications cables.
7 Turn on the display, let it warm up, and then turn on the computer. Press
is displayed at the bottom of the screen. This displays a series of screens that show the computer's configuration details.
Check that the new memory is recognized (it is shown on the Main screen in the Memory fields).
A
System Board
Retaining Clips
Step 3 Step 4
D
C
C
B
B
A
when Press <F2> to enter SETUP
2 Installing Accessories in Your Computer
Installing Main Memory
D
For best performance, fill
bank "A" and "B" first, then
fill bank "C", and "D".
28