Panasonic DMC-TZ3S - Lumix Digital Camera Operating Instructions Manual page 91

Digital still camera
Hide thumbs Also See for DMC-TZ3S - Lumix Digital Camera:
Table of Contents

Advertisement

Memory cards
To prevent damage to cards and data
Avoid high temperatures, direct sunlight, electromagnetic waves, and static
electricity.
Do not bend, drop, or expose to strong impacts.
Do not touch connectors on reverse of card or allow them to become dirty or wet.
When disposing of/transferring memory cards
If using the 'format' or 'delete' functions on your camera or computer, this only
changed the file management information, and does not completely delete the data
from within the memory card. When disposing of or transferring your memory cards,
we recommend physically destroying the memory card itself, or using commercially
available computer data erasing software to completely delete the data from the
card. Data within memory cards should be managed responsibly.
Battery
Store battery in battery carrying case after use.
Do not use if damaged or dented (especially connectors),
e.g. by dropping (can cause faults).
The unusable battery should be discarded in accordance
with battery recycling laws. Call the RBRC hotline at 1-800-
822-8837 for information.
Estimated recording capacity of 270 [300
is based on the following CIPA
1
DMC-TZ2
CIPA standards:
Using Panasonic SD memory card (16MB) ●Temperature 23 °C (73.4 °F), humidity
50 % ●NORMAL PICTURE mode ●LCD monitor ON ●STABILIZER (MODE1) ●First
picture taken 30 sec after power turned on ●1 picture taken per 30 sec ●Full flash
used for every other picture ●Zoom operation for each picture (max. W → max. T, or
max. T → max. W) ●Power turned off after each 10 pictures, battery allowed to cool
2
CIPA = Camera & Imaging Products Association
When charging
Remove any dirt on connectors with dry cloth.
Keep at least 1 m (3.28 feet) away from AM radio (may cause radio interference).
Noises may be emitted from inside, but this is not a fault.
Always remove from mains socket after charging (up to 0.1 W consumed if left in
place).
SDHC Logo is a trademark.
Leica is a registered trademark of Leica Microsystems IR GmbH.
Elmar is a registered trademark of Leica Camera AG.
Other names, company names, and product names printed in these instructions
are trademarks or registered trademarks of the companies concerned.
1
] pictures (P.14)
2
standards.
91
VQT1B61

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents