Panasonic DMC-TZ3S - Lumix Digital Camera Operating Instructions Manual page 51

Detailed settings can be made for recording, such as coloring, sensitivity, aspect ratio,
and picture size.
Items vary depending on mode.
' ', ' ', ' ', '
Settings are remembered even if power is turned off.
Settings remain applied when using flash photography.
Even though the 'AWB' setting is fixed in 'UNDERWATER' scene mode (P.44), fine
adjustments may still be made.
Fine adjustments cannot be made when 'COL.MODE' (P.57) is set to 'COOL',
'WARM', 'B/W', or 'SEPIA'.
Set sensitivity to lighting. We recommend higher settings to take clear pictures in darker
locations.
Applicable modes:
Settings: AUTO (automatic) /100 / 200 / 400 / 800 / 1250
(if
AUTO: Automatically set with range up to 200 (640 when using flash) according to
brightness.
Maximum ISO sensitivity ('ISO LIMIT') can be set when using
Setting guide
SENSITIVITY
Location (recommended)
Shutter speed
Interference
Aspect ratio of picture can be changed according to printing or playback format.
Applicable modes:
Settings:
Same as 4:3 TV or
computer
Edges may be cut off when printing – be sure to check in advance (P.88).
', and ' ' can be adjusted independently.
mode: 'ISO LIMIT' 400 / 800 / 1250)
ASPECT RATIO
4
3
SENSITIVITY
100
Bright
(outdoors)
Slow
Low
(Still pictures only)
3
2
Same as normal film
camera
mode.
1250
Dark
Fast
High
16
9
For playback on
widescreen/high
definition TV
VQT1B61
51