Inserting Battery And Card - Panasonic DMC-TZ3S - Lumix Digital Camera Operating Instructions Manual

2
Preparations
Status indicator
Compatible memory cards (sold separately)
The following SD standard-based cards (Panasonic brand
recommended)
●
SD memory cards, 8MB-2GB
● SDHC memory cards (4GB) → (P.96)
(4GB (or greater) cards without the SDHC logo are not of SD standard.)
→ For recording picture/time capacity, see (P.92)
→ For model numbers and types,
see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)
MultiMediaCards (still images only)
Caution
Always use genuine Panasonic batteries.
If you use other batteries, we cannot guarantee the quality of this product.
Do not remove card or battery while power is 'ON' or while status indicator is on
(Camera may cease operating correctly, or card/recorded contents may be damaged).
The reading/writing speed of a MultiMediaCard is slower than an SD memory card. When a
MultiMediaCard is used, the performance of certain features may be slightly slower than advertised.
Keep the Memory Card out of reach of children to prevent swallowing.

Inserting battery and card

Battery
(check orientation)
Card
(check orientation)
Do not touch
connector
Set the camera ON/OFF switch to
OFF
Slide to the 'OPEN' position and
open the lid
Completely insert battery and card
(both click into place)
Close lid
Slide to the 'LOCK' position.
LOCK
To remove
To remove battery,
move lever in direction
of arrow.
To remove card,
press down in center.
OPEN
lever
SDHC logo
SDHC memory
card
15
VQT1B61