Panasonic DMC-TZ3S - Lumix Digital Camera Operating Instructions Manual page 87

LCD monitor (continued)
Date/age is not displayed.
Current date, TRAVEL DATE (P.48), and ages in 'BABY'(P.42) and 'PET' (P.44) scene
modes are only displayed for approx. 5 sec after start-up, setting changes, or mode
changes. They cannot be always displayed.
Flash
No flash emitted.
Flash set to 'FORCED OFF
When set to 'AUTO
Flash cannot be emitted in MOTION PICTURE mode
SCENERY' (P.42), 'FIREWORKS', 'STARRY SKY', 'AERIAL PHOTO', and 'HIGH
SENS.' (P.44) scene modes.
Two flashes emitted
Red-eye reduction is active (P.36).
(Flashes twice to prevent eyes appearing red.)
Playback
Pictures have been rotated.
'ROTATE DISP.' is set to 'ON' (P.66).
(Automatically rotates pictures from portrait to landscape. Some pictures taken facing
up or facing down may be interpreted as being portrait.)
→ Rotate with 'ROTATE DISP.' (P.66).
Cannot view pictures.
Mode dial is not set to
No pictures in built-in memory or card (pictures played from card if inserted, from built-
in memory if not).
Folder/file number displayed as '-'. Picture is black.
Picture edited on computer or taken on different device.
Battery removed immediately after picture taken, or picture taken with low battery.
→ Use 'FORMAT' to delete (P.73).
Incorrect date displayed in calendar playback.
Picture edited on computer or taken on different device.
'CLOCK SET' is incorrect (P.16).
(Incorrect date may be displayed in calendar playback on pictures copied to computer
and then back to camera, if computer and camera dates differ.)
Depending on the subject, an interference fringe may appear on the screen.
This is called moire. This is not a malfunction.
' (P.36).
', flash may not be emitted in certain conditions.
.
, or the 'SCENERY', 'NIGHT
VQT1B61
87