Restore Held Jobs; Some Held Jobs Were Not Restored; Supply Needed To Complete Job; Tray [X] Paper Size Unsupported - Lexmark C746 User Manual

Troubleshooting

Restore held jobs?

Try one or more of the following:
•
Select Restore on the printer control panel to restore all held jobs stored in the printer hard disk. For
non‑touch‑screen printer models, press
• Select Do not restore if you do not want any print jobs to be restored. For non‑touch‑screen printer models, press
to confirm.

Some held jobs were not restored

Select Continue to clear the message. For non‑touch‑screen printer models, press
Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.

Supply needed to complete job

A supply needed to complete the job is missing. Cancel the current job.

Tray [x] paper size unsupported

The paper size in the specified tray is unsupported. Replace it with a supported paper size.

Unsupported disk

1
Remove the unsupported disk, and then install a supported one.
2
Select Continue to clear the message and continue printing. For non‑touch screen printer models, press
confirm.
31.xx Missing or defective [color] cartridge
The specified toner cartridge is either missing or not functioning properly.
• Remove the specified toner cartridge, and then reinstall it.
• Remove the specified toner cartridge, and then install a new one.
32.xx [Color] cartridge part number unsupported by device
Remove the specified toner cartridge, and then install a supported one.
to confirm.
to confirm.
220
to