Universal Setup Menu; Reports Menu - Lexmark C746 User Manual

Understanding printer menus

Universal Setup menu

Use
Units of Measure
Inches
Millimeters
Portrait Width
3–48 inches
76–1219 mm
Portrait Height
3–48 inches
76–1219 mm
Feed Direction
Short Edge
Long Edge

Reports menu

Reports menu
Use
Menu Settings Page
Device Statistics
Network Setup Page
To
Specify the unit of measure.
Note: Inches is the US factory default setting. Millimeters is the
international factory default setting.
Set the width for a portrait page orientation.
Notes:
• 8.5 inches is the US factory default setting. 216 mm is the
international factory default setting.
• If the specified width exceeds the maximum, then the printer uses
the maximum width allowed.
•
The width can be increased in 0.01-inch or in 1-mm increments.
Set the height for a portrait page orientation.
Notes:
•
14 inches is the US factory default setting. 356 mm is the
international factory default setting.
•
If the specified height exceeds the maximum, then the printer uses
the maximum height allowed.
•
The height can be increased in 0.01-inch or in 1-mm increments.
Specify the feed direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the paper or specialty media can be
loaded in either direction.
To
Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Print a report containing printer statistics such as supply information and details
about printed pages.
Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Note: This menu item appears only in network printers or in printers connected
to print servers.
145